Axcela H carbide tipped blade from Amada

amada logo

Axcela H set carbide bandsaw blade from Amada suitable for cutting difficult-to-cut materials such as Inconel and titanium alloys in stressed materials.

  • Stainless Steel, Aluminium, Heat Treatment Steel, Nickel Alloys, Titanium alloys, Hot Work Die Steel, Copper Alloys, Heat Resistance Steel
  • Carbide Tipped Bandsaw Blade (HV 1.600)
  • Recommended for Nickel-Alloys and Special Alloys like Titanium

  • Please enter your full name
  • Please enter your phone number including STD code
  • Please enter your email address for corespondence
  • Please enter your company name
  • Please enter your postcode
  • Please indicate your preferred method for us to reply by.
  • Please indicate the areas of interest.
  • Please ask your questions here.
  • Please could you indicate above what method you used to find Accurate.
  • By making this enquiry, you consent to receiving an emailed reply. Please tick the boxes below to indicate that you wish to receive further emails regarding this or similar products. At no point is your information shared with any other company or marketing service.

Description

  • Flat-Set type and Triple-Chip tooth profile (FST tooth geometry)
  • Dependable sawing on highly abrasive materials.
  • Sharp-Edge tooth tip (Sharpest tooth form)
  • Increased tooth penetration on hardened materials.
  • Utilizing a new and improved grade of carbide chip
  • Optimized blade material with improved resistance to wear.
  • Kerf-dispersal tooth shape
  • It shows high precision cutting by reducing cutting resistance effectively for hard to cut and large size material.
  • Sharp-Edge tooth tip (Sharpest tooth form)
  • Increased tooth penetration on hardened materials.
  • Utilizing a new and improved grade of carbide chip
  • Optimized blade material with improved resistance to wear.

axcela h001   axcela h001   axcela h002
 

Suitable for

Mild Steel Mild Steel Stainless Steel Stainless Steel Aluminium Aluminium
Heat Treatment Steel Heat Treatment Steel Bearing Steel Bearing Steel Nickel Alloys Nickel Alloys
Cold work die steel Cold Work Die Steel Cast iron Cast Iron Titanium alloys Titanium alloys
Hot Work Die Steel Hot Work Die Steel High Speed Steel High Speed Steel Copper Alloys Copper Alloys
Heat Resistance Steel Heat Resistance Steel

 

Suitable for Cutting Sections

Solid round bar sections Solid square bar sections Round tube sections Bundle cutting Structural sections

 

Availability

Band width (mm) Band thickness (mm) NCG1S
Pitch
0.5/0.8 0.9/1.1 0.9/1.1 1.4/1.6 1.8/2
41 1.3 X
54 1.6 o o
67 1.6 o o o
80 1.6 o o

X : Standard item o : Separate order required

* The WS (Wide set) type blade is a special saw blade with a measure against pinching which occurs easily when cutting the roll formed large size H-beam (applicable to H-beam whose width is over 400mm and mainly intended for that of 600mm or more width). Using of the WS type blade for cutting the material where no pinching would occur may shorten the service life of the blade.

These specifications and appearance are subject to change without notice for reason of improvement.
 

Video