Julia Circular Saw Blades
Cut through Metal Effectively with Our Circular Saw Blades
Circular saw blades for metal cutting saws in high speed steel (5% molybdenum), super high speed steel (5% cobalt) suitable for cutting-off steels and alloys with hardness between 500 N/mm² and 800 N/mm² to cut tubes and pipes, open sections and solid sections up to 200 mm.
HSS circular saw blades for metal cutting with diameters from 160 mm to 700 mm
ISO 9001 approved manufacturing process
DMo5 : HSS circular saw blades for cutting steel alloys
Co5 : HSS saw blades for cutting stainless steel and medium hard steel 550 - 700 MPa.
Evolution : circular saw blades for cutting carbon steel and stainless steel
Our range of circular saw blades goes from Ø 160 mm to Ø 620 mm, with thicknesses from a minimum of 1 mm to a maximum of 6 mm, with tooth forms A – AW – B – BW – C – BR (chip breaker).
The standard finish of the whole range is HP-GRIND; we also supply CO² steam treated blades and PVD (Physical Vapour Deposition) coated for the longest life.
Julia Utensili has been ISO90001 certified since February 2003 to guarantee the quality of products and with the knowledge gained in 25 years of experience in circular saw blade manufacture to continually improve blade performance.
All HSS blades are manufactures in Europe using local steel and workmanship, to the highest standards.
Coated HSS blades
Julia HSS circular saw blades are available with a range of coatings designed to prolong the blade life in a number of materials and material sections.
To obtain the maximum performance of the coatings it’s necessary to ensure very high standards of the blade body material and to properly prepare the blade surface so that an optimal adhesion of the surface coating will provide a the longest life. To guarantee these results Julia has developed a special process for preparing the blades by grinding of the surface to be coated up to a surface finish better than 0,3 Rz, cleaning with chemical activation of the surfaces and a subsequent treatment under vacuum which leave the surface perfectly clean, free of oxides and dry, so that the deposited layer achieves maximum adhesion.
Post surface treatment, all blades undergo a further check for run-out and flatness, and, where found out of tolerance, the blades are tensioned again.
All of the Julia PVD (Physical Vapour Deposition) coatings are applied by Julia Utensili under strict quality controls, assuring the high quality of the final product.
The coatings have now simple names to help our customers remember them but also to underline their high degree of specialty when compared to standard coatings as TiN, TiCN, etc.
Circular saw blades – HSS
HSS-DMo5
Julia HSS circular saw blades top quality coated or uncoated saw blades for all materials and saws in high speed steel (5% molybdenem content) suitable for cutting off steels and alloys with hardness values between 500 N/mm² and 800 N/mm². The saw blades are used on manual, semi-automatic and fully automatic sawing machines to cut tubes and pipes, hollow sections and solid sections up to 200mm diameter.
The range goes from 160mm diameter to 620mm diameter, with thicknesses from a minimum of 1 mm to a maximum of 6mm in various increments, with tooth forms A – AW – B – BW – C – BR (chip breaker).
The standard type for the whole range is HP-GRIND; we also supply CO² steam treated blades and PVD (Physical Vapour Deposition) coated ones.
HSS-Co5%
Circular saws in super high speed steel SHSS (5% cobalt content) suitable for cutting steels and alloys with hardness values above 800 N/mm². The saw blades are used on semi-automatic and fully automatic machines to cut tubes, thick wall pipes, hollow sections and solid sections up to 200mm diameter.
Solid carbide (HM) DIN slitting saws
Solid carbide slitting saws manufactured according to DIN 1837 (fine) and DIN 1838 (coarse).
We can also produce every kind of specials according to the material to be cut.
The blades can be manufactured flat or with hollow-ground up to the bore or with hub.
Choosing the right solid carbide saw blade:
using high cutting speeds and feeds,our solid carbide saw blades give the greatest possible cutting rates and considerably reduce component unit cost.
Always ensure that:
– cutter shafts are rigid and vibrations-free
– that the parts to be machined are well clamped :
– avoid side pressure on the saw blade.
If possible use a flood coolant, such as an emulsioned oil if working on ferrous metals, petrol of kerosene if cutting aluminium and aluminium alloys, nickel, silver, etc., compressed air if working on cast iron or plastics.
Circular saw blades DIN 1837 A – 1838 B – BW
DIN Standard Slitting Saws (HSS-DMo5/HSS-Co5%)
Slitting saws in both high speed and super high speed steels suitable for cutting-off steels and alloys on manual, semi-automatic and fully automatic machines.
The saw blade range is ø 20 mm – ø 315 mm with thicknesses ranging 0,2 mm – 6 mm in variable increments with tooth forms: A – B – BW.
All standard saws are available in HP-GRIND execution but are readily available in VAPO or P.V.D. (Physical Vapour Deposition) coated execution.
Precision saws for screw-slotting, jewelry and tube-cutters
Precision screw-slotting saws – tooth form “A”
Circular saws in both high speed and super high speed steel suitable for slotting screws in all types of steels and alloys.
The saw blades are all flat ground (without hub) and the entire range is executed with tooth form “A”. The saw blade range is ø 80 mm, ø 100 mm and ø 125 mm. Blade thicknesses range from 0,7 mm – 2 mm in decimal increments.
Precision saws for jewelry – tooth form “A”
Circular saws in both high speed and super high speed steel suitable for goldsmith’s cutting and machining purposes.
The saw blades are all hollow ground (with hub) and the entire range is executed with tooth pitches finer than 1 millimetre
Precision saws for tube-cutters – tooth form “Bw”
Circular saws in both high speed and super high steel suitable for cutting tubes sized ø 10 mm – ø 325 mm, with wall thickness ranging from 2 mm to 10 mm, in both standard steels and high alloy steels (stainless). The saw blade range is ø 63 mm, ø 68 mm and ø 75 mm. Blade thicknesses are 1,2 mm, 1,6 mm and 2,0 mm and the tooth form is “Bw”.
The whole range of saws is available in HP-GRIND form as standard, but is also readily available in our P.V.D. (Physical Vapour Deposition) coatings too.
HM carbide tipped circular saw blades for light alloys
HM carbide tipped circular saws suitable for cutting-off pipes, profiles and solids in light alloys (aluminium etc.)
The toothing presents a pre-cutter and a finishing tooth, with a positive angle (12°) for solids cutting and a negative angle (16°) for pipes and profiles cutting.
Available with a 32 mm central bore and 2/11/63 pinholes.
On request we can manufacture the blades with central bores of 25,4 – 30 – 40 and 50 mm.
Kanefusa HM carbide tipped circular saw blades for steel cutting
HM carbide tipped circular saws suitable for cutting steel solids or profiles with big wall thickness.
The special patented tooth form allows these special blades to drastically reduce the cutting times and improves the surface finishing if used on the right machine.
Our range covers different diameters from 250 mm to 315 mm with a central bore of 32 and 4/9/50 pinholes or diameters from 360 to 460 mm with central bore 50 mm and 4/16/80 pinholes.
Also available with cermet toothing or TiN coated.
HM carbide tipped circular saw blades for dry cutting
HM carbide tipped circular saws suitable for dry cutting of metals, plastics, compound materials and wood on portable machines (Bosch, Makita, Hitachi, Jepson, Black&Decker, etc.)
Available with different diameters from 110 mm to 350 mm and with a central bore of 20 – 25,4 – 30 and 32 mm according to the machine.
Friction saws for cutting pipe and profiles
Friction to the service of cutting
Julia produces friction saws for flying or static cutting of pipes and profiles in carbon steel such as ST37, ST52, etc., with hardness ranging from 300 and 600 N/mm².
Our friction saw blades are manufactured with two different materials: chrome-vanadium steel (80CrV2 or 1.2235) and wolframium-molibdenum (73WCrMoV2 or 1.2604).
Our available range encompasses all dimensions mounted on the most common macchines using the friction cutting technology, such as:
Abbey Etna, Dreistern, Mannesmann, Oto Mills, MTM, Vai Seuthe, TRM, Trennijaeger.
The friction saw blades, unlike cut-off circular saws (low RPM), run at a very high RPM, so generating in the cutting area very high temperatures bringing the material in plastic condition easing its cutting.
The cutting is performed in a dry condition and the blade is cooled off only after the cutting; this lubrication lengthens the blade life.
Circular Knives
Circular knives in HSS-DMo5, HSS-Co 5%, K110, K190 PM and S 390 PM Steels, suitable for rubber, paper, plastic, tissue, foam and food cutting. Applications are on semi and fully automatic machines. Our range spans from ø 20 mm through to ø 600 mm and the standard execution of all circular knives is HP-GRIND finish but readily available in our P.V.D. (Physical Vapour Deposition) coatings too.
Contact us about our range of HSS and TCT circular saw blades