Reclamation and failure investigation using saws


Substantial cost savings and valuable knowledge can be gained through metal reclamation and failure investigation using bandsaws, where large, machined components or fabrications are sectioned using heavy duty bandsaw machines at Accurate Cutting Services.

Band saw gantry machine

Thermally sensitive or heat-treated materials can be worked without producing heat-affected zones, contamination, or the distortion which can be associated with gas, plasma or laser-cutting processes.

Separating components at the cost of only 3mm of material lost in the bandsaw cut.


    Reclamation and Investigation through sawing

    Recovering turbine shaft by bandsawing

    Substantial cost savings and valuable knowledge can be gained through reclamation and component failure investigation, where large, machined components or fabrications are sectioned using heavy duty band-saw machines at Accurate Cutting Services.

    Thermally sensitive or heat-treated materials can be worked without producing heat-affected zones, contamination, or the distortion which can be associated with gas-, plasma- or laser-cutting processes.

    Recovering end plates from heat exchangers

    Heat exchanger tubestack

    The end plates of heat exchangers are often one of the more expensive parts of the fabrication, and during tube replacement extracting the end plates for reuse during the re-tubing process. The end plates have many hundreds of tight tolerance holes drilled, designed for a fit with the tubes. Once the casing is removed, and […]