Amada SGLB M42 bandsaw blade

amada logo

Amada SGLB M42 bi-metal high performance bandsaw blade for all industrial bandsaw machines.

  • M42 Bandsaw Blade for full material to thick wall pipes
  • Hardness of HRC68-69
  • For a wide range of materials from normal steel to difficult to cut materials

  • Please enter your full name
  • Please enter your phone number including STD code
  • Please enter your email address for corespondence
  • Please enter your company name
  • Please enter your postcode
  • Please indicate your preferred method for us to reply by.
  • Please indicate the areas of interest.
  • Please ask your questions here.
  • Please could you indicate above what method you used to find Accurate.
  • By making this enquiry, you consent to receiving an emailed reply. Please tick the boxes below to indicate that you wish to receive further emails regarding this or similar products. At no point is your information shared with any other company or marketing service.


Amada SGLB M42 bi-metal high performance bandsaw blade for all industrial bandsaw machines.

The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.

Amada SGLB M42 bandsaw blade


7 degree positive rake angle
Hardness of HRC 68-69
M-42 cobalt high speed steel edge
Specially designed tooth form

Better tooth penetration
High heat resistance
High wear resistance

Fast Cutting Rates
High production rate
Long life on moderate to difficult to cut materials
Low cost per cut


Edge Material M42 HSS
Hardness of Tooth Tip 950 Hv
Wear Resistance (1 – 5) *** (3 Stars)
Chipping Resistance (1-5) ** (2 Star)


The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products.


Width Thickness Pitch
.75/1.1 1.1/1.5 1.5/2 2/3 3/4 4/6 5/7 6/10 8/12
3/4″ 0.035 PR
1″ 0.035 MG MG PR PR S S
1 1/4″ 0.042 AG AG MG PR PR S
1 1/2″ 0.050 AG AG AG WS/MG PR PR
2″ 0.063 AG AG AG AG MG MG
2 5/8″ 0.063 AG AG AG AG MG MG
3″ 0.063 AG AG AG


S :Standard Tooth, Straight Raker Set
PR: 7 Degree Positive Rake
MG:10 Degree Positive Rake
AG:Positive Rake, Large Gullet Size
WS:Wide Set


Specifications may change without notice at the sole discretion of Amada’s Engineering Department.