Axcela H (AP) carbide tipped blade from Amada

Axcela H (AP) carbide tipped blade from Amada

Axcela H AP set carbide bandsaw blade from Amada suitable for cutting difficult-to-cut materials such as Inconel and titanium alloy with an Anti-Pinch option to reduce blade seizes in stressed materials

...
  • Stainless Steel, Aluminium, Heat Treatment Steel, Nickel Alloys, Titanium alloys, Hot Work Die Steel, Copper Alloys, Heat Resistance Steel
  • Carbide Tipped Bandsaw Blade (HV 1.600)
  • Recommended for Nickel-Alloys and Special Alloys like Titanium
  • AP for materials which have a tendency for pinching
Request More Information
Category:
  • Flat-Set type and Triple-Chip tooth profile (FST tooth geometry)
  • Dependable sawing on highly abrasive materials.
  • Sharp-Edge tooth tip (Sharpest tooth form)
  • Increased tooth penetration on hardened materials.
  • Utilizing a new and improved grade of carbide chip
  • Optimized blade material with improved resistance to wear.

AXCELA-H-NSR1N

  • Wide set pattern against pinching
  • Reduced blade pinching and significantly improved sawing in wide cross section profiles of hard to cut materials.
  • Kerf-dispersal tooth shape
  • It shows high precision cutting by reducing cutting resistance effectively for hard to cut and large size material.
  • Sharp-Edge tooth tip (Sharpest tooth form)
  • Increased tooth penetration on hardened materials.
  • Utilizing a new and improved grade of carbide chip
  • Optimized blade material with improved resistance to wear.
Dovetail-shaped set teeth02Dovetail-shaped set teeth01
Dispersed kerf teeth
Mild SteelMild SteelStainless SteelStainless SteelAluminiumAluminium
Heat Treatment SteelHeat Treatment SteelBearing SteelBearing SteelNickel AlloysNickel Alloys
Cold work die steelCold Work Die SteelCast ironCast IronTitanium alloysTitanium alloys
Hot Work Die SteelHot Work Die SteelHigh Speed SteelHigh Speed SteelCopper AlloysCopper Alloys
Heat Resistance SteelHeat Resistance Steel
Solid round bar sectionsSolid square bar sectionsRound tube sectionsBundle cuttingStructural sections
Band width (mm)Band thickness (mm)NCG1SNSS1NNSR1N
Pitch
0.5/0.80.9/1.10.9/1.1 WS0.9/1.11.4/1.61.8/20.9/1.1 WS1.4/1.6 WS1.8/2 WS
411.3XX
541.6oooo
671.6oooooo
801.6ooo

X : Standard item o : Separate order required

* The WS (Wide set) type blade is a special saw blade with a measure against pinching which occurs easily when cutting the roll formed large size H-beam (applicable to H-beam whose width is over 400mm and mainly intended for that of 600mm or more width). Using of the WS type blade for cutting the material where no pinching would occur may shorten the service life of the blade.

These specifications and appearance are subject to change without notice for reason of improvement.

Privacy Preference Center