- Bandsaw blades, band saw machines, circular saw blade sharpening and metal cutting services
Amada SUPER8 Bimetal bandsaw blade
Amada SUPER8 Bimetal bandsaw blade
New
Super8 modified M-42 high-speed steel bi-metal saw blade
...Super8 modified M-42 high-speed steel bi-metal saw blade
General-purpose blade ideal for cutting mild steel and structural steel. “Chip Curler” tooth shape and unique set pattern result in longer blade life.
 |
Mild Steel |  |
Stainless Steel |  |
Aluminium |
 |
Heat Treatment Steel |  |
Bearing Steel |  |
Nickel Alloys |
 |
Cold Work Die Steel |  |
High Speed Steel |  |
Titanium alloys |
 |
Hot Work Die Steel |  |
Heat Resistant Steel |  |
Copper Alloys |
 |
Cast Iron |
 |
 |
 |
 |
 |
Amada Modified M42 High-Speed Steel Edge
Unique “Chip Curler” tooth design
The distinctive set pattern reduces noise and vibrations during cutting resulting in much longer blade life and noticeably better cutting performance as well. Super8 is ideally suited to cut mild steel.
ADVANTAGES
Enhanced tooth chipping resistance bring a longer life
Improved tooth penetration due to tooth angles and clearance
BENEFITS
General-purpose blade for more materials and sections and fewer blade changes
Low cost per cut
Longer life for mild steel and structural steel shapes
| SUPER8 | ||
|---|---|---|
| Edge Material | Amada Modified M42 High-Speed Steel | |
| Hardness of Tooth Tip | 930 Hv | |
| Wear Resistance (1 – 5) | ** | (2 Stars) |
| Chipping Resistance (1-5) | **** | (4 Stars) |
The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products.
Variable Positive Rake
| width | thickness | 0.75/1 | 1.1/1.5 | 1.5/2 | 2/3 | 3/4 | 4/6 | 5/7 |
|---|---|---|---|---|---|---|---|---|
| 27 | 0.9 | |||||||
| 34 | 1.1 | |||||||
| 41 | 1.3 | |||||||
| 54 | 1.6 | |||||||
| 67 | 1.6 | |||||||
| 80 | 1.6 |
Specifications may change without notice at the sole discretion of Amada’s Engineering Department.
Related Products
-
Amada MAGNUM HI-LO bandsaw blade
Magnum HiLo varying tooth height and set M-71 blade for metal cutting band saw
... -
Amada Chipbreaker M42 bandsaw blade
M42 chipbreaker bandsaw blade for metal cutting designed to reduce heat generated and increased chip load to remove the most material. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.
... -
Amada HI-LO M42 bandsaw blade
...
A bandsaw blade with varying tooth height design and an M-42 welded edge blade for metal cutting saws.
