Amada SGLB M42 bandsaw blade
Amada SGLB M42 bi-metal high performance bandsaw blade for all industrial bandsaw machines.
- M42 Bandsaw Blade for full material to thick wall pipes
- Hardness of HRC68-69
- For a wide range of materials from normal steel to difficult to cut materials
- MONEL, K-MONEL, INCONEL 718, HASTELLOY INCOLLOY 800 ASTROLOY, MONEL 400, TITANIUM
Amada SGLB M42 bi-metal high performance bandsaw blade for all industrial bandsaw machines.
The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.
7 degree positive rake angle
Hardness of HRC 68-69
M-42 cobalt high speed steel edge
Specially designed tooth form
ADVANTAGES
Better tooth penetration
High heat resistance
High wear resistance
BENEFITS
Fast Cutting Rates
High production rate
Long life on moderate to difficult to cut materials
Low cost per cut
SGLB | ||
---|---|---|
Edge Material | M42 HSS | |
Hardness of Tooth Tip | 950 Hv | |
Wear Resistance (1 – 5) | *** | (3 Stars) |
Chipping Resistance (1-5) | ** | (2 Star) |
The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products.
Width | Thickness | Pitch | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
.75/1.1 | 1.1/1.5 | 1.5/2 | 2/3 | 3/4 | 4/6 | 5/7 | 6/10 | 8/12 | ||
3/4″ | 0.035 | PR | ||||||||
1″ | 0.035 | MG | MG | PR | PR | S | S | |||
1 1/4″ | 0.042 | AG | AG | MG | PR | PR | S | |||
1 1/2″ | 0.050 | AG | AG | AG | WS/MG | PR | PR | |||
2″ | 0.063 | AG | AG | AG | AG | MG | MG | |||
2 5/8″ | 0.063 | AG | AG | AG | AG | MG | MG | |||
3″ | 0.063 | AG | AG | AG |
S :Standard Tooth, Straight Raker Set
PR: 7 Degree Positive Rake
MG:10 Degree Positive Rake
AG:Positive Rake, Large Gullet Size
WS:Wide Set
Specifications may change without notice at the sole discretion of Amada’s Engineering Department.
Related products
Amada SIGMA Bimetal bandsaw blade
Amada Sigma M42 Bimetal bandsaw blade with extremely positive rake angle and Hi-Lo tooth geometry especially for hard to cut materials
...Amada PROTECTOR M42 bandsaw blade
...
Amada PROTECTOR bandsaw blade exclusively for structural steel, rolled sections metal cutting.Amada SUPER HLG Bimetal bandsaw blade
Super HLG M-42 high-speed steel bi-metal saw blade for hard to cut material from tool steel to stainless steel.
...