Magnum HiLo varying tooth height and set M-71 blade for metal cutting band saw...
Magnum HiLo varying tooth height and set M-71 blade for metal cutting band saw
With its special alloying technology, the Amada MAGNUM HI-LO bandsaw blade achieves HRC70 tooth hardness. It maintains positive cutting action and outlasts other blades in production cutting of large-diameter, work hardening steels and nickel-base super alloys with tensile strength of up to 164,000 psi.
|Mild Steel||Stainless Steel||Aluminium|
|Heat Treatment Steel||Bearing Steel||Nickel Alloys|
|Cold Work Die Steel||High Speed Steel||Titanium Alloys|
|Hot Work Die Steel||Heat Resisting Steel||Copper Alloys|
15 degree positive rake angle
Hardness of HRC70
Hi-Lo tooth height
Patented M-71 high speed edge
High heat resistance
High wear resistance
Higher tooth hardness than M-42 bi-metal blade
Reduced cutting resistance
Faster cutting on difficult to cut material
Faster cutting on large diameter material
Long life on difficult to cut material
|Edge Material||AMADA M71 HSS|
|Hardness of Tooth Tip||1000 HV|
|Wear Resistance (1 – 5)||****||(4 Stars)|
|Chipping Resistance (1-5)||*||(1 Star)|
The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products.
V: Variable Positive Rake
M42 chipbreaker bandsaw blade for metal cutting designed to reduce heat generated and increased chip load to remove the most material. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting....
Amada Sigma M42 Bimetal bandsaw blade with extremely positive rake angle and Hi-Lo tooth geometry especially for hard to cut materials...
DUOS M42 Bi-Metal bandsaw blade for thin wall to solid sections for a metal cutting band saw...