- Bandsaw blades, band saw machines, circular saw blade sharpening and metal cutting services
Amada Chipbreaker M42 bandsaw blade
Amada Chipbreaker M42 bandsaw blade
M42 chipbreaker bandsaw blade for metal cutting designed to reduce heat generated and increased chip load to remove the most material. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.
...M42 chipbreaker bandsaw blade for metal cutting designed to reduce heat generated and increased chip load to remove the most material. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.
 |
Construction Steel |  |
Stainless Steel |  |
Aluminium |
 |
Heat Treatment Steel |  |
Bearing Steel |  |
Nickel Alloys |
 |
Cold Work Die Steel |  |
High Speed Steel |  |
Titanium Alloys |
 |
Hot Work Die Steel |  |
Heat Resistant Steel |  |
Copper Alloys |
 |
Cast Iron |
 |
 |
 |
 |
 |
Reduced heat generated at increased chip loads
Prevents scoring on gullets
Reduced chip weld
Reduced backing fatigue
ADVANTAGES
Higher cutting rates
Increased blade life
Reduced tooth stripping
Reduced blade breakage
| M42 chipbreaker bandsaw blade | ||
|---|---|---|
| Edge Material | M42 HSS | |
| Hardness of Tooth Tip | 950 Hv | |
| Wear Resistance (1 – 5) | *** | (3 Stars) |
| Chipping Resistance (1-5) | ** | (2 Stars) |
The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products.
| Width | Thickness | Pitch | ||||
|---|---|---|---|---|---|---|
| 0.75/1 | 1.1/1.5 | 2/3 | 3/4 | 4/6 | ||
| 1″ | 0.035 | V | ||||
| 1 1/4″ | 0.042 | V | V | V | ||
| 1 1/2″ | 0.050 | V | V | V | V | |
| 2″ | 0.063 | V | V | V | V | |
| 2 5/8″ | 0.063 | V | V | V | V | |
| 3″ | 0.063 | V | ||||
V: Variable Positive Rake
Specifications may change without notice at the sole discretion of Amada’s Engineering Department.
Related Products
-
Amada SMARTCUT thin kerf bandsaw blade
...
Amada SMARTCUT thin kerf saw blade is a bi-metal blade for metal cutting band saw machines, especially for thin cut applications. -
Amada Chipbreaker M42 bandsaw blade
M42 chipbreaker bandsaw blade for metal cutting designed to reduce heat generated and increased chip load to remove the most material. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.
... -
Amada HI-LO M42 bandsaw blade
...
A bandsaw blade with varying tooth height design and an M-42 welded edge blade for metal cutting saws.
