Amada CMB150 high speed carbide circular saw

Amada logoAmada CMB150 high speed carbide circular saw

Circular Saw CMB 150

This carbide circular saw machine uses circular carbide tipped blades to offer the optimum solution for the sawing of bar material with maximum precision and minimum cycle time.


  • High Performance Sawing with Precision

    The inclined guide of the saw head ensures a perfect chipping angle, achieving both extreme accuracy and maximum cutting performance.

  • Amada Circular Saw Blades

    The use of very thin carbide saw blades with a small cutting width guarantees minimal waste with maximum machine performance. Due to the special tooth geometry, optimum cut faces are produced with almost reflective surfaces.

  • Wide Range of Machining

    The CMB circular saws make it possible to machine many materials and forms: solid material, tubes, square material and profiles.

  • Cleaner and Drier Sawing Process

    The proven minimal quantity lubrication system ensures clean and almost dry cuts. The combination of the proven Amada CNC technologies means that reworking is unnecessary in most cases.

  • Easy Operation

    The practical Amada CNC technology enables easy operation without the need for machining or programming knowledge.

  • Maximum Tool Life

    In order to reduce the vibration of the saw blade, the machine is equipped with special saw blade plate guides, which guide the blade on both sides near the tooth engagement. This results in maximum cutting precision and optimum blade life, giving an excellent cost per cut ratio.

  • Cutting Capacity

    Round material (diameter in mm) 75 – 150
    Rectangular material (edge length mm) 75 – 100


The Amada CMB150 carbide circular saw machine is a robust solution for fast and accurate cutting of steel bar sections.
CMB high speed carbide circular saw machine

SCP103H swarf compactor


Service, repairs and spares for all Amada saws and machinery, covering the whole of the UK


Amada disposable carbide circular saw machine bladesFit Amada saw blades for best performance


Machine Cutting capacity
Round (Dia) 75 – 150
Rectangle (W x H) 75 x 75 – 100 x 100
Saw blade Blade size
(OD x Bore x T) (mm)
460 x 50 x 2.7
Number of teeth 40, 60
Blade speed
50 – 115
(Inverter controlled invariable speed change)
Motors (kW) Saw blade 15
Hydraulic pump 1.5
Cut to length feed 2.0
Power requirement (kVA) 39
Tan capacity (L) Hydraulic 20
Table height (mm) 1000
Machine dimensions
(W x L x H) (mm)
2358 x 7432 x 1982
Mass of machine (kg) 3300
Automatic loader Allowable load
(Mass of work) (kg)
Mass of Automatic loader (kg) 1080


The Amada automatic carbide circular sawing machine CMB 150 CNC meets highest demands on cutting precision and machining performance, while being more efficient than other sawing and cutting procedures. Through the use of special, only 2.7mm thick one-way carbide saw blades in conjunction with minimum quantity cooling/lubrication, perfectly smooth edges and burr free segments can be obtained with very little scrap.

An inclined loading magazine on the loading side and automatic sorting of trim cuts and remnants ensure a fully automated production process.