Carbide tipped circular saw blades – Amada


carbide tipped circular sawAmada logo

Disposable carbide tipped circular saw blades designed for accurate cuts at a higher cutting rate. This blade features the highest quality sawing grade of carbide.

FEATURES

  • Highest quality grade of carbide tip material for sawing
  • State-of-the-art manufacturing equipment
  • Tested and proven body material
  • Unmatched accuracy and consistency from tooth to tooth on blade to blade
  • Pioneers in the manufacturing and development of carbide blades

Benefits

  • Longest possible blade life
  • Higher cutting rate
  • Minimal or no deflection during cutting operation
  • Lowest cost-per-cut in all types of material
  • Minimal burr due to consistent chip-Load
  • Accurate cuts with a high quality surface finish

carbide tipped circular saw tcbcr

TCB-CR

Carbide tipped circular saw blade suitable for cutting general mild steel materials such as structural steel.

Target materials

Structural alloys and structural carbon steels having a carbon content of 0.45% or more.

Features

Cermet tipped
Tips with excellent wear resistance and deposit resistance.
Stable life and good cutting quality for cutting carbon steel and alloy steel materials.

 

CERMET circular saw blade: TCB-CR
Model Blade Type Size
CM75 TCB-CR 285 mm x 2.0 mm x 60 teeth
TCB-CR 285 mm x 2.0 mm x 80 teeth
CM100 TCB-CR 360 mm x 2.25 mm x 60 teeth
TCB-CR 360 mm x 2.25 mm x 80 teeth
TCB-CR 360 mm x 2.25 mm x 100 teeth
CM150 TCB-CR 460 mm x 2.7 mm x 40 teeth
TCB-CR 460 mm x 2.7 mm x 60 teeth
TCB-CR 460 mm x 2.7 mm x 80 teeth
TCB-CR 460 mm x 2.7 mm x 100 teeth

 

carbide tipped circular saw tcbti

TCB-TI

Titanium-coated circular saw blade with excellent wear resistance

Application

  • Cutting of general hard steel materials.

Material of tooth tips

  • Carbide (and coated)

Target materials

  • Structural alloys, pipes, special purpose steels (except for stainless steels and heat-resisting steels) and structural carbon steels having a carbon content of 0.4% or less.

Features

  • Carbide tipped in combination with original coating for high toughness.
  • This model is excellent in both chipping resistance and wear resistance. Stable life and good cutting quality is ensured in the cutting of high carbon steel materials.

 

Carbide TIM coated circular saw blade: TCB-TI
Model Blade Type Size
CM75 TCB-TI 285 mm x 2.0 mm x 60 teeth
TCB-TI 285 mm x 2.0 mm x 80 teeth
CM100 TCB-TI 360 mm x 2.25 mm x 60 teeth
TCB-TI 360 mm x 2.25 mm x 80 teeth
TCB-TI 360 mm x 2.25 mm x 100 teeth
CM150 TCB-TI 460 mm x 2.7 mm x 40 teeth
TCB-TI 460 mm x 2.7 mm x 60 teeth
TCB-TI 460 mm x 2.7 mm x 80 teeth
TCB-TI 460 mm x 2.7 mm x 100 teeth

 

carbide tipped circular saw tcbcb

TCB-CB

Circular saw blade suitable for cutting general mild steel materials

Target materials

  • Structural carbon steels, structural alloys and pipes.

Features

  • Carbide tipped
  • Carbide tips with high toughness are used. This model is excellent in chipping. resistance, applicable to a wide range of materials and suitable for cutting various steel materials.
Carbide circular saw blade: TCB-CB
Model Blade Type Size
CM75 TCB-CB 285 mm x 2.0 mm x 60 teeth
TCB-CB 285 mm x 2.0 mm x 80 teeth
CM100 TCB-CB 360 mm x 2.25 mm x 60 teeth
TCB-CB 360 mm x 2.25 mm x 80 teeth
TCB-CB 360 mm x 2.25 mm x 100 teeth
CM150 TCB-CB 460 mm x 2.7 mm x 40 teeth
TCB-CB 460 mm x 2.7 mm x 60 teeth
TCB-CB 460 mm x 2.7 mm x 80 teeth
TCB-CB 460 mm x 2.7 mm x 100 teeth

 

carbide tipped circular saw tcbsu

TCB-SU

Circular saw blade suitable for cutting stainless steel materials

Application

  • Cutting of difficult-to-cut materials

Material of tooth tips

  • Carbide

Target materials

  • Special purpose steels (stainless steels)

Features

  • Tool tips with high toughness suitable for cutting stainless steel materials.
  • Minimized adhesion of chips to prevent tooth chipping caused by chip inclusion.

 

Carbide circular saw blade for stainless steel: TCB-SU
Model Blade Type Size
CM75 TCB-SU 285 mm x 2.0 mm x 60 teeth
TCB-SU 285 mm x 2.0 mm x 80 teeth
CM100 TCB-SU 360 mm x 2.25 mm x 60 teeth
TCB-SU 360 mm x 2.25 mm x 80 teeth
TCB-SU 360 mm x 2.25 mm x 100 teeth
CM150 TCB-SU 460 mm x 2.7 mm x 40 teeth
TCB-SU 460 mm x 2.7 mm x 60 teeth
TCB-SU 460 mm x 2.7 mm x 80 teeth
TCB-SU 460 mm x 2.7 mm x 100 teeth

 

carbide tipped circular saw tcbpt

TCB-PT

Circular saw blade suitable for cutting structural steel pipes

Application

  • Cutting of thin-walled pipes

Material of tooth tips

  • Cermet

Target materials

  • Pipes containing more than 0.25% carbon (thin-walled pipes)

Features

  • This blade is designed exclusively for cutting pipes. The increased number of teeth delivers the stable cutting of thin-walled pipes.
  • Capable of minimizing deformation in materials and burrs in the cutting process.

 

Carbide circular saw blade for tube: TCB-PT
Model Blade Type Size
CM75 TCB-PT 285 mm x 2.0 mm x 60 teeth
TCB-PT 285 mm x 2.0 mm x 80 teeth
CM100 TCB-PT 360 mm x 2.25 mm x 60 teeth
TCB-PT 360 mm x 2.25 mm x 80 teeth
TCB-PT 360 mm x 2.25 mm x 100 teeth
CM150 TCB-PT 460 mm x 2.7 mm x 40 teeth
TCB-PT 460 mm x 2.7 mm x 60 teeth
TCB-PT 460 mm x 2.7 mm x 80 teeth
TCB-PT 460 mm x 2.7 mm x 100 teeth

 

carbide tipped circular saw tcbtisu

TCB-TI SU

Coated circular saw blade for cutting stainless steel materials, characterized by high wear resistance

Application

  • Cutting of difficult-to-cut materials

Material of tooth tips

  • Carbide (and coated)

Target materials

  • Special purpose steels (stainless steels)

Features

  • Blade life significantly is increased by coating for cutting stainless steel materials. This model has excellent deposit resistance and wear resistance.
  • Stable life and good cutting quality.

 

Carbide circular saw blade: TCB-TI SU
Outer Diameter (mm) Inner Diameter (mm) Blade Thickness (mm) Number of teeth
250 32 2.0 72/80
285 40 2.0 60/80
360 40 2.6(2.5) 60/80/100
360 50 2.6(2.5) 60/80/100

Specifications may change without notice at the sole discretion of Amada’s Engineering Department.