Amada HFA250W automatic bandsaw


Amada logoAmada HFA250W automatic bandsaw

Bandsaw Machine HFA250W

TheĀ Amada HFA250W automatic bandsaw is designed around the capability of the saw blade, therefore guaranteeing optimum cutting performance.

Utilising a 34mm wide blade the Amada HFA250W bandsaw machine has sufficient beam strength to enable it to cut any metal quickly and efficiently, up to its maximum capacity of 250mm, thus delivering an excellent cost-per-cut ratio.

FEATURES

  • NC Rear Vice

    The rear vice is controled by an LED Programming unit situated on the control panel.

  • Number of cuts , tolerance, and auto trimming functions can all be set by the unit.

  • Up to 99 different programmes can be set.

  • Tolerance

    The tolerance of the material to be cut can be set from +/- 0.1 to +/- 1mm

  • Auto trim cut

    Material can be measured for the first cut from the front vice resulting in the trim cut being a cut component piece.

  • Pressure/flow feed control

    The independent pressure and flow controls in series ensure that optimum cutting can be achieved regardless of the section or alloy being cut.

  • Drive wheel transmission

    This is designed and built by Amada to provide high efficiency reduction, therefore delivering more power to the large diameter shaft. This ensures that developed torque is transferred to the blade.

  • Maximum cutting capacity

    Round bar: 250 mm round bar
    Rectangular bar: 300mm wide x 250mm high

  • Automatic, powered chip conveyor

SCP103H swarf compactor

Amada performance bandsaw blades

Bandsaw spares and repairs

Spares and repairs

For a full specification, demonstration or quotation call now on 01274 870311