Gantry saws


Soitaab gantry saws with fixed and rotating guides enabling multi-axis sawing solutions that require minimal job reorientation between cuts.


    Friggi 2MF gantry bandsaw

    Friggi Gantry saw

    Bandsaw with fixed table and movable head to cut very heavy material of large sizes. Its capability to cut in vertical, horizontal and diagonal direction makes it suitable for the working of ingots and forged pieces as well as large blocks for steel stockholders. The gantry saw is one of the most flexible bandsaw machines available for […]

    Soitaab 2000mm gantry bandsaw

    Soitaab 2000 x 2000 x 5000 gantry saw

    Gantry saw – capacity 2000 x 2000 x 5000. The Soitaab gantry saw is a versatile cutting system, with the following features:

    Fast loading and setup of complex jobs
    Simple loaded and unloading from a flat table
    Horizontal, vertical and diagonal cutting reduced need to reset the job
    Horizontal cuts along the entire stroke length

    Soitaab 3000mm gantry bandsaw

    Soitaab 3000mm large gantry saw

    Gantry capacity 3000 x 3000 x 8000. The Soitaab gantry saw is a versatile cutting system, with the following features:

    Fast loading and setup of complex jobs
    Simple loaded and unloading from a flat table
    Horizontal, vertical and diagonal cutting reduced need to reset the job
    Horizontal cuts along the entire stroke length

    Soitaab GANTRY bandsaw TM horizontal non-ferrous machine

    Soitaab gantry saw for non-ferrous cutting

    The Soitaab gantry bandsaw TM (rotating table) bandsaw has been designed to cut aluminium blocks both for horizontal and vertical directions. Available models are: 1050 – 1250 – 1500 – 2000 – 2500. On request the horizontal stroke can be from 3000 to 15000 mm or more. This gantry bandsaw has been developed for high speed horizontal cutting with […]

    Soitaab horizontal GANTRY bandsaw machine

    Soitaab heavy duty gantry bandsaw

    Horizontal gantry bandsaw machine, suitable for cutting most material profiles, round, square, flat, block, castings, forgings, plate etc. Available models are: 1050 – 1250 – 1500 – 2000 – 2500 – 3000 – 3500. On request the horizontal stroke can be from 3000 to 15000 mm or more. The moving head with rotatable guides (on some models) features […]

    Soitaab multi-axis 3000mm gantry bandsaw installed at Goodwins

    Soitaab 3000mm gantry horziontal bandsaw

    Goodwin companies come through thick and thin to attain their world-leading capabilities – helped by Accurate Cutting Services Goodwin Steel Castings produces machined castings, of up to 16,000kg weight and for critical-duty applications, mainly for exporting. The company, which was established more than 130 years ago, provides industry-leading casting solutions through its advanced uses of […]


    Spares and repairs

    A gantry saw is often used in place of horizontal bandsaws where the job has to be repositioned between cuts. Using a gantry saw reduces the number of times a job has to be lifted and reset – reducing time and handling risks, and improving throughput and accuracy.

    Soitaab/Friggi gantry saws are also available with rotating guides that enable vertical cuts, horizontal cuts or diagonal cuts – all without repositioning the job between cuts.

    Another option is to include a turntable within the table to allow jobs to be rotated or turned around between cuts – another time and safety improvement.

    And finally, for the maximum throughput as well as built in redundancy, one table can accommodate two saw heads – one job lift, two cuts at the same time – double throughput! And for critical applications, should one saw head become inoperable for some reason, the remaining saw head can continue to produce work – built in redundancy.