Amada SGLB M42 bandsaw blade

Amada SGLB M42 bi-metal high performance bandsaw blade Amada logo
Amada SGLB M42 bi-metal high performance bandsaw blade for all industrial bandsaw machines.


The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.

Amada SGLB blade catalog


  • 7 degree positive rake angle
  • Hardness of HRC 68-69
  • M-42 cobalt high speed steel edge
  • Specially designed tooth form


  • Better tooth penetration
  • High heat resistance
  • High wear resistance


  • Fast Cutting Rates
  • High production rate
  • Long life on moderate to difficult to cut materials
  • Low cost per cut



Edge Material M42 HSS
Hardness of Tooth Tip 950 Hv
Wear Resistance (1 – 5) *** (3 Stars)
Chipping Resistance (1-5) ** (2 Star)

The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products.


Width Thickness Pitch
.75/1.1 1.1/1.5 1.5/2 2/3 3/4 4/6 5/7 6/10 8/12
3/4″ 0.035 PR
1″ 0.035 MG MG PR PR S S
1 1/4″ 0.042 AG AG MG PR PR S
1 1/2″ 0.050 AG AG AG WS/MG PR PR
2″ 0.063 AG AG AG AG MG MG
2 5/8″ 0.063 AG AG AG AG MG MG
3″ 0.063 AG AG AG

S :Standard Tooth, Straight Raker Set
PR: 7 Degree Positive Rake
MG:10 Degree Positive Rake
AG:Positive Rake, Large Gullet Size
WS:Wide Set

Specifications may change without notice at the sole discretion of Amada’s Engineering Department.