Axcela H carbide tipped blade from Amada


AXCELA-H carbide bandsaw blade Amada logo
Axcela H carbide bandsaw blade from Amada suitable for cutting difficult-to-cut materials such as Inconel and titanium alloy with an Anti-Pinch option to reduce blade seizes in stressed materials

 

  • Flat-Set type and Triple-Chip tooth profile (FST tooth geometry)
  • Dependable sawing on highly abrasive materials.
  • Sharp-Edge tooth tip (Sharpest tooth form)
  • Increased tooth penetration on hardened materials.
  • Utilizing a new and improved grade of carbide chip
  • Optimized blade material with improved resistance to wear.

AXCELA-H-NSR1N

  • Wide set pattern against pinching
  • Reduced blade pinching and significantly improved sawing in wide cross section profiles of hard to cut materials.

AXCELA-H-NCG1S

  • Kerf-dispersal tooth shape
  • It shows high precision cutting by reducing cutting resistance effectively for hard to cut and large size material.
  • Sharp-Edge tooth tip (Sharpest tooth form)
  • Increased tooth penetration on hardened materials.
  • Utilizing a new and improved grade of carbide chip
  • Optimized blade material with improved resistance to wear.

Dovetail-shaped set teeth02Dovetail-shaped set teeth01
Dispersed kerf teeth

 

AVAILABILITY

Band width (mm) Band thickness (mm) NCG1S NSS1N NSR1N
Pitch
0.5/0.8 0.9/1.1 0.9/1.1 WS 0.9/1.1 1.4/1.6 1.8/2 0.9/1.1 WS 1.4/1.6 WS 1.8/2 WS
41 1.3 X X
54 1.6 o o o o
67 1.6 o o o o o o
80 1.6 o o o

X : Standard item o : Separate order required

* The WS (Wide set) type blade is a special saw blade with a measure against pinching which occurs easily when cutting the roll formed large size H-beam (applicable to H-beam whose width is over 400mm and mainly intended for that of 600mm or more width). Using of the WS type blade for cutting the material where no pinching would occur may shorten the service life of the blade.

These specifications and appearance are subject to change without notice for reason of improvement.