• Mechanism for the rotation of head block for angled cuts up to 45° left with locking lever.
• Pneumatic vice with removable anti-burr.
• Pneumatic cylinder for head movement, with brake for speed adjustment.
• Transmission by means of a double expandable pulley for speeds variable between 18 and 93 rpm.
• Head tilting on adjustable self-lubricating bushings.
• 600 mm step feeder controlled by pneumatic cylinder.
• Repeater up to maximum of 9 steps so as to reach a total stroke of 5400 mm.
• Maximum opening of feeder collet = 160 mm.
• Programmable piece counter.
• Minimum scrap on final cut = 160 mm.
• Feeder speed adjustment valve.
• Ammeter.
• Reverser.
• Emergency push button with key and lockable switch on control panel.
• Blade lubrication-cooling system with electric pump.
• Coolant liquid vat with extractable pump for vat cleaning.
• Complete protection guard with rapid blade change system.
• Circular blade 350Ø.
• Blade cleaning roller.
• Instruction book for use and maintenance.
• Set of wrenches for the maintenence.

ACCESSORIES AVAILABLE UPON REQUEST:

• Roller table for piece loading and unloading.
• Coolant liquid.

TECHNICAL DATA
	kW	1.5
	RPM	18 / 93
	mm	170
	mm	350
	Kg	420
	dBA	62

CUTTING SPECS
	mm	-	115	115	-
	mm	-	100	95	-
	mm	-	160 x 90	120 x 80	-

• Mechanism for the rotation of head block for angled cuts up to 60° left, 45° right and 45° off the vertical.
• Two pneumatic vices adjustable both lengthwise and laterally.
• Pneumatic cylinder for head movement, with brake for speed adjustment.
• Two speeds of blade rotation obtainable by means of inversion of the pulleys.
• Perfectly balanced head, tilting upon shielded ball bearings.
• 600 mm step feeder controlled by pneumatic cylinder
• Repeater up to maximum of 9 steps so as to reach a total stroke of 5400 mm.
• Maximum opening of feeder collet = 160 mm.
• Programmable piece counter.
• Minimum scrap on final cut = 360 mm.
• Feeder speed adjustment valve.
• Ammeter.
• Emergency push button with key and lockable switch on control panel.
• Vaporizer.
• Complete protection guard with rapid blade change system.
• Instruction book for use and maintenance.
• Set of wrenches for the maintenence.

ACCESSORIES AVAILABLE UPON REQUEST:

• Sectional pedestal in metal sheet, 34 kg.
• Pedestal in welded metal sheet, 49 kg.
• Roller table for piece loading and unloading.
• Coolant liquid.

TECHNICAL DATA
	kW	2.2
	RPM	2400 / 3400
	mm	177
	mm	350
	Kg	390
	dBA	89

CUTTING SPECS
	mm	95	100	95	50
	mm	95	95	90	50
	mm	130 x 55	155 x 90	130 x 55	150 x 40

The automatic loader is very sturdy and it can bear up to 4 tons. The feeding speed is about 250 m per minute: this implies a great speed of movement; this cutting line can fit blades from a minimum diameter of 140 up to a maximum of 370 mm and the cutting speed can be adjusted in a wide range from 38 to 287 RPM. The automatic bar stop ensures precision also when it is necessary to rapidly change different cutting measures.

The sturdy patented discharge system quietly discharges the part and maintains the correct position of the piece after the cut and so makes it easier to attach this machine to other working units.

The control software, developed by our R&D department, assures great flexibility thanks to the possibility to modify, during the work cycle, the feeding speed, thrust torque and the cutting speed. This sofware helps the operator to choose the kind of blade to use, to optimise cutting length and to regulate cutting speed. The MCL 120 is a real work station that can be attached to Pedrazzoli’s optional units: deburring machines, collection units for cut part stacking and washing system to clean metal pieces.

• Mechanism for the rotation of head block for angled cuts up to 60° left , 45° right and 45° off the vertical.
• Two pneumatic vices adjustable both lengthwise and laterally.
• Pneumatic cylinder for head movement, with brake for speed adjustment.
• Two speeds of blade rotation obtainable by means of inversion of the pulleys.
• Perfectly balanced head, tilting upon shielded ball bearings.
• Drive pedal for semi-automatic cycle.
• Emergency push button with key on control panel.
• Vaporizer.
• Complete protection guard with rapid blade change system.
• Bar stop with millimetric bar positionable on both sides of machine.
• Pedestal in welded metal sheet, 49 kg.
• Instruction book for use and maintenance.
• Set of wrenches for the maintenence.

ACCESSORIES AVAILABLE UPON REQUEST:

• Piece loading and unloading table.
• Vertical pneumatic anti-burr vice.
• Coolant liquid.

TECHNICAL DATA
	kW	2.2
	RPM	2400 / 3400
	mm	177
	mm	350
	Kg	190
	dBA	89

CUTTING SPECS
	mm	95	100	95	55
	mm	95	95	90	50
	mm	130 x 55	155 x 90	130 x 55	150 x 40

• Safety switch for blade drive on lever hand grip.
• Complete protection guard with rapid blade change system.
• Emergency push button with key on control panel.
• Two-speed switch.
• Head tilting on adjustable self-lubricating bushings.
• Mechanism for the rotation of head block for angled cuts up to 60° left and 45° right with blocking lever.
• Lateral head movement unit for 45° cuts left and longitudinal cuts.
• Support crank which allows to cut with the same ease and output big pieces (crank forward) and small pieces (crank back).
• Manual vice with rapid clamping.
• Refrigerating liquid vat with immersion pump to reduce overall dimensions
• Bar stop with millimetric bar.
• Circular blade 275Ø.
• Instruction book for use and maintenance.
• Set of wrenches for maintenance.

ACCESSORIES AVAILABLE UPON REQUEST:

• Sectional pedestal in sheet metal, 34 kg.
• Pedestal in welded sheet metal, 49 kg.
• Roller table for piece loading and unloading.
• Coolant liquid.

• Mechanism for the rotation of head block for angled cuts up to 45° left with locking lever.
• Pneumatic vice with removable anti-burr.
• Pneumatic cylinder for head movement, with brake for speed adjustment.
• Transmission by means of a double expandable pulley for speeds variable between 18 and 93 rpm.
• Head tilting on adjustable self-lubricating bushings.
• Reverser.
• Drive pedal for semi-automatic cycle.
• Emergency push button with key on control panel.
• Blade lubrication-cooling system with electric pump.
• Coolant liquid vat with extractable pump for vat cleaning.
• Complete protection guard with rapid blade change system.
• Piece support arm with sliding roller.
• Bar stop with millimetric bar.
• Circular blade 350Ø.
• Blade cleaning roller.
• Pedestal in welded metal sheet, 49 kg.
• Instruction book for use and maintenance.
• Set of wrenches for the maintenence.

ACCESSORIES AVAILABLE UPON REQUEST:

• Roller table for piece loading and unloading.
• Coolant liquid.

TECHNICAL DATA
	kW	1.5
	RPM	18 / 93
	mm	170
	mm	350
	Kg	197 / 253
	dBA	62

CUTTING SPECS
	mm	110	115	115	100
	mm	90	100	95	80
	mm	110 x 80	160 x 190	120 x 80	100 x 80

• Mechanism for the rotation of head block for angled cuts up to 60° left and 45° right with blocking lever.
• Pneumatic vice with removable anti-burr.
• Pneumatic cylinder for head movement, with brake for speed adjustment.
• Transmission by means of a double expandable pulley for speeds variable between 18 and 93 rpm.
• Head tilting on adjustable self-lubricating bushings.
• Reverser.
• Drive pedal for semi-automatic cycle.
• Emergency push button with key on control panel.
• Blade lubrication-cooling system with electric pump.
• Coolant liquid vat with extractable pump for vat cleaning.
• Complete protection guard with rapid blade change system.
• Piece support arm with sliding roller.
• Bar stop with millimetric bar.
• Circular blade 350Ø.
• Blade cleaning roller.
• Pedestal in welded metal sheet, 49 kg.
• Instruction book for use and maintenance.
• Set of wrenches for the maintenence.

ACCESSORIES AVAILABLE UPON REQUEST:

• Roller table for piece loading and unloading.
• Coolant liquid.

TECHNICAL DATA
	kW	1.5
	RPM	18 / 93
	mm	170
	Kg	197 / 253
	mm	350
	dBA	62

CUTTING SPECS
	mm	110	115	115	100
	mm	110 x 80	160 x 90	120 x 80	100 x 80
	mm	90	100	95	80

WITH INFINITELY VARIABLE BLADE SPEED TO CUT ALL TYPES OF METALS

MACHINE COMPLETE WITH:

Semiautomatic hydraulic saw with blade movement from below for straight and angled cuts of middle heavy section bars and bars. The transmission of movement to blade (max. 425) is carried out through helical hardened gear reduction, ground and coupled without clearance. Machine carries out compensation of cutting advance speed. The rich choice of accessories ensures that the HORIZON BROWN 425 SA satisfies all the most exacting cutting necessities.

• Three speed motor.
• Long stroke vertical hydraulic vice.
• Hand-wheel for table rotation.
• Rear jaws with screw adjustment.
• Self balancing valve for forward movement of head.
• Manual rotation and blocking of working table with three stops adjustable as required within the rotation field: 0°+/-170°.
• Instruction book for use and maintenance.
• Set of wrenches for the maintenence.
• Digital adjustment of blade ascent stroke.

TECHNICAL DATA
	kW	Three speed motor: 1,2-1,3-1,5 kW
	RPM	18/25/36
	mm	260
	mm	425
	Kg	Weight without oil 950
	dBA	Sound level on simulated cycle: 72

CUTTING SPECS
		90°	45°
	mm	142	142
	mm	130	120
IPN	mm	220	180
UPN	mm	260	200

GREAT VERSATILITY FOR BARS AND SECTIONS

MACHINE COMPLETE WITH:

• Mechanism for the rotation of head block for angled cuts up to 45° left and right with locking lever.
• Pneumatic vice with removable anti-burr.
• Pneumatic cylinder for head movement, with brake for speed adjustment.
• Head tilting on adjustable self-lubricating bushings.
• Reverser.
• Drive pedal for semi-automatic cycle.
• Emergency push button with key on control panel.
• Blade lubrication-cooling system with electric pump.
• Coolant liquid vat with extractable pump for vat cleaning.
• Complete protection guard with rapid blade change system.
• Piece support arm with sliding roller.
• Bar stop with millimetric bar.Circular blade 275Ø
• Blade cleaning roller.
• Pedestal in welded metal sheet, 49 kg.
• Instruction book for use and maintenance.
• Set of wrenches for the maintenence.

ACCESSORIES AVAILABLE UPON REQUEST:

• Roller table for piece loading and unloading.
• Coolant liquid.

TECHNICAL DATA
	kW	1.3 / 1.8
	RPM	43 / 86
	mm	145
	mm	300
	Kg	170
	dBA	65

CUTTING SPECS
	mm	65	80	80	-
	mm	50	75	75	-
	mm	85 x 50	120 x 75	90 x 75	-