These DoALL heavy-duty power saws are with double column construction.

Machines have two proper guide columns which are hardened, ground and polished to give a long surface life. A rigid welded construction with a large base that eliminates vibration while providing maximum stability. Adequate clearance angles are provided to give good chip flow from the cutting area to the chip auger (optional for Manual machines), with the coolant container positioned in the machine frame.

All built for high production, fast cutting and excellent finish.

The semi-automatic (Manual) C-820M has a controller which incorporated most of all major functions such as opening/closing the vices.

SPECIFICATIONS  

STANDARD EQUIPMENT

-       Manual and semi-automatic cut cycles

-       Control panel with diagnostic messages

-       Metered feed

-       Band drive with AC drive and worm gear drive

-       Digital readout for band speed

-       Automatic guide arm

-       Carbide faced saw guides with large diameter lead in rollers on both guide arms

-       Hardened, ground, anti wear steel plates on all work clamping surfaces

-       Ground, hardened and hard-chrome plated guide columns

-       Worktable with hardened wear plates

-       Power driven band cleaning brush

-       Hydraulic power unit with valve manifold

These DoALL heavy-duty power saws are with double column construction. Machines have two proper guide columns which are hardened, ground and polished to give a long surface life. A rigid welded construction with a large base that eliminates vibration while providing maximum stability. Adequate clearance angles are provided to give good chip flow from the cutting area to the chip auger (optional for Manual machines), with the coolant container positioned in the machine frame. All built for high production, fast cutting and excellent finish.

The semi-automatic (Manual) C-670M has a controller which incorporated most of all major functions such as opening/closing the vices.

SPECIFICATIONS  

STANDARD EQUIPMENT

-       Manual and semi-automatic cut cycles

-       Control panel with diagnostic messages

-       Metered feed

-       Band drive with AC drive and worm gear drive

-       Digital readout for band speed

-       Automatic guide arm

-       Carbide faced saw guides with large diameter lead in rollers on both guide arms

-       Hardened, ground, anti wear steel plates on all work clamping surfaces

-       Ground, hardened and hard-chrome plated guide columns

-       Worktable with hardened wear plates

-       Power driven band cleaning brush

-       Hydraulic power unit with valve manifold

These DoALL heavy-duty power saws are with double column construction. Machines have two proper guide columns which are hardened, ground and polished to give a long surface life. A rigid welded construction with a large base that eliminates vibration while providing maximum stability. Adequate clearance angles are provided to give good chip flow from the cutting area to the chip auger (optional for Manual machines), with the coolant container positioned in the machine frame. All built for high production, fast cutting and excellent finish.

The C-530NC has a NC controller which incorporated most of all major functions from opening/closing the vices to programming different jobs with alphanumeric names or codes. With an optional CNC function and band deviation monitor the machine will set the parameters and control these after the operator has given the required material information.

SPECIFICATIONS  

STANDARD EQUIPMENT

-       NC controller with LCD display

-       Multi language diagnostics with info messages

-       Material libraries

-       Band speed readout

-       Servo feed

-       Worm gear Band drive with AC inverter

-       Automatic guide arm

-       Carbide faces inserts with lead in rollers

-       Power driven chip conveyor

-       Power driven band brush

-       Rapid saw head raise with mechanical stop

-       Out of stock sensor

-       Automatic pull back of fixed part of vices

-       Hardened, ground, anti wear steel plates on all work clamp surfaces

-       Ground, hardened and hard-chrome plated guide columns

-       Band wheel door interlocks

-       Automatic kerf compensation

 

These DoALL heavy-duty power saws are with double column construction. Machines have two proper guide columns which are hardened, ground and polished to give a long surface life. A rigid welded construction with a large base that eliminates vibration while providing maximum stability. Adequate clearance angles are provided to give good chip flow from the cutting area to the chip auger (optional for Manual machines), with the coolant container positioned in the machine frame. All built for high production, fast cutting and excellent finish.

The semi-automatic (Manual) C-530M has a controller which incorporated most of all major functions such as opening/closing the vices.

SPECIFICATIONS  

STANDARD EQUIPMENT

-       Manual and semi-automatic cut cycles

-       Control panel with diagnostic messages

-       Metered feed

-       Band drive with AC drive and worm gear drive

-       Digital readout for band speed

-       Automatic guide arm

-       Carbide faced saw guides with large diameter lead in rollers on both guide arms

-       Hardened, ground, anti wear steel plates on all work clamping surfaces

-       Ground, hardened and hard-chrome plated guide columns

-       Worktable with hardened wear plates

-       Power driven band cleaning brush

-       Hydraulic power unit with valve manifold

 

These DoALL heavy-duty power saws are with double column construction.

Machines have two proper guide columns which are hardened, ground and polished to give a long surface life. A rigid welded construction with a large base that eliminates vibration while providing maximum stability. Adequate clearance angles are provided to give good chip flow from the cutting area to the chip auger (optional for Manual machines), with the coolant container positioned in the machine frame.

All built for high production, fast cutting and excellent finish.

The C-430NC has a NC controller which incorporated most of all major functions from opening/closing the vices to programming different jobs with alphanumeric names or codes. With an optional CNC function and band deviation monitor the machine will set the parameters and control these after the operator has given the required material information.

SPECIFICATIONS  

STANDARD EQUIPMENT

-       NC controller with LCD display

-       Multi language diagnostics with info messages

-       Material libraries

-       Band speed readout

-       Servo feed

-       Worm gear Band drive with AC inverter

-       Automatic guide arm

-       Carbide faces inserts with lead in rollers

-       Power driven chip conveyor

-       Power driven band brush

-       Rapid saw head raise with mechanical stop

-       Out of stock sensor

-       Automatic pull back of fixed part of vices

-       Hardened, ground, anti wear steel plates on all work clamp surfaces

-       Ground, hardened and hard-chrome plated guide columns

-       Band wheel door interlocks

-       Automatic kerf compensation

These DoALL heavy-duty power saws are with double column construction. Machines have two proper guide columns which are hardened, ground and polished to give a long surface life. A rigid welded construction with a large base that eliminates vibration while providing maximum stability. Adequate clearance angles are provided to give good chip flow from the cutting area to the chip auger (optional for Manual machines), with the coolant container positioned in the machine frame. All built for high production, fast cutting and excellent finish. The semi-automatic (Manual) C-430M has a controller which incorporated most of all major functions such as opening/closing the vices.

SPECIFICATIONS  

STANDARD EQUIPMENT

-       Manual and semi-automatic cut cycles

-       Control panel with diagnostic messages

-       Metered feed

-       Band drive with AC drive and worm gear drive

-       Digital readout for band speed

-       Automatic guide arm

-       Carbide faced saw guides with large diameter lead in rollers on both guide arms

-       Hardened, ground, anti wear steel plates on all work clamping surfaces

-       Ground, hardened and hard-chrome plated guide columns

-       Worktable with hardened wear plates

-       Power driven band cleaning brush

-       Hydraulic power unit with valve manifold

These saws provide exceptionally high torque at low speeds for unmatched productivity and operating economy. They use a wide, 41 mm saw blade that provides both greater beam strength and large tooth gullet capacity. Coupled with the ability to use either bi-metal or tungsten carbide saw blades, these machines can cut virtually any material at production rates.

SPECIFICATIONS  

Click here to view the embedded video.

STANDARD EQUIPMENT

-       Spring-loaded, zero clearance, carbide faced saw guide with lead in rollers on both guide arms

-       Powered chip conveyor to discharge chips

-       Split front vice for minimum butt end

-       Integrated, recirculating coolant system

-       Coolant applied through saw guides

-       Power driven band cleaning brush

-       Flushing hose

-       Discharge tray with coolant return

-       Saw head with rapid approach control

-       Automatic work height sensor

-       Programmable cut length with digital readout

-       Rapid travel index vice control

-       Out of stock sensor

-       Idler wheel motion detector, stops machine automatically if blade stalls

-       Band speed control and display at operator’s control panel

-       Band door interlocks

-       Variable vice pressure control with gauges located by operator’s control panel

-       Automatic band-kerf compensation

Click here to view the embedded video.

 

These saws provide exceptionally high torque at low speeds for unmatched productivity and operating economy. They use a wide, 41 mm saw blade that provides both greater beam strength and large tooth gullet capacity. Coupled with the ability to use either bi-metal or tungsten carbide saw blades, these machines can cut virtually any material at production rates.

The C-4100 series features one-piece construction of the sawing and indexing sections.

An underslung carriage on the indexing vice allows the workpiece to rest on roller conveyors instead of on the shuttle vice. Together, these features provide superior indexing accuracy throughout the life of the machine.

The C-4100A uses a simple pushbutton and switches control panel with manual length setting device and piece counter to set the machine.

SPECIFICATIONS  

Click here to view the embedded video.

STANDARD EQUIPMENT

-       Saw guides, spring-loaded, carbide faced inserts with lead in rollers on both guide arms

-       Powered chip conveyor

-       Split front vice for minimum butt end

-       Recirculating coolant system

-       Power driven chip brush

-       Preset cut counter

-       Discharge tray with coolant return

-       Saw head with rapid approach control

-       Automatic work height sensor

-       Easy to set stock index with digital readout

-       Rapid travel index vice control

-       Multiple index. (8 times)

-       Out of stock sensor

-       Idler wheel motion detector, stops machine automatically if band stalls in workpiece

-       Random cut positioning

-       Band speed control and display at operators control panel

-       Variable vice pressure control, with gauges located by operators control panel

-       Automatic band-kerf compensation

These DoALL heavy-duty power saws are with double column construction.

Machines have two proper guide columns which are hardened, ground and polished to give a long surface life. A rigid welded construction with a large base that eliminates vibration while providing maximum stability. Adequate clearance angles are provided to give good chip flow from the cutting area to the chip auger (optional for Manual machines), with the coolant container positioned in the machine frame. All built for high production, fast cutting and excellent finish.

The C-350NC has a NC controller which incorporated most of all major functions from opening/closing the vices to programming different jobs with alphanumeric names or codes. Already equipped with CNC function this machine will set the parameters after the operator has given the required material information.

SPECIFICATIONS  

STANDARD EQUIPMENT

-       NC controller with LCD display

-       Multi language diagnostics with info messages

-       Material libraries

-       Band speed readout

-       Metered CNC feed

-       Worm gear Band drive with AC inverter

-       Automatic guide arm

-       Carbide faces inserts with lead in rollers

-       Power driven chip conveyor

-       Power driven band brush

-       Rapid saw head raise with mechanical stop

-       Out of stock sensor

-       Automatic pull back of fixed part of vices

-       Hardened, ground, anti wear steel plates on all work clamp surfaces

-       Ground, hardened and hard-chrome plated guide columns

-       Band wheel door interlocks

-       Automatic kerf compensation

DoALL model C-3350NC is a production power saw with an enclosed cabinet design that contains chips and cutting fluids during high-speed operations. The machine features a powerful 7,5 kW AC inverter motor that drives large 533 mm band wheels. Sophisticated NC controls with a touch screen console allows programming of up to 10 different jobs. Combine these features with multiple indexing, work height sensor and a unique work holding vice that reduces remnant lengths and you will have a machine that provides outstanding performance with the lowest operation costs.

SPECIFICATIONS

STANDARD EQUIPMENT

-       Dual columns for saw head mounting with linear rails and trucks on guide columns

-       3 degree head cant

-       Spring-loaded, zero clearance, carbide – faced saw guides with lead-in

     roller on both guide arms

-       Coolant is applied through saw guide arms and flushing hose

-       Automatic work height sensor

-       Pressure and rate controlled head feed

-       Hydraulic band tension

-       Saw head rapid approach control

-       Saw enclosure provides additional operator safety and contains more chips and coolant

-       NC controls with operator display & interface buttons

-       Rapid travel index vice control

-       Band break switch

-       Hydraulic motor driven band brush

-       Programmable cut length w/digital readout

-       Outboard front vice reduces remnant ends

-       Out of stock sensor

-       Automatic multi-index

-       Automatic band-kerf compensation

-       Random cut positioning

-       Band door interlocks

-       Display showing band motor amps load draw

-       Blade guards

-       Powered chip conveyor