This group of additional fluids is developed to improve the maintenance of the machines as well as to keep the cutting fluids in excellent condition.

Way Lubricant 068

Way Lubricant 068 is suitable for workshops equipped with modern CNC machines and machining centres where high positioning accuracy is required to achieve top level of surface finish and component tolerances.

Way Lubricant 068 distinguishes itself by a rapid and exact demulsifying effect, when working with DoALL coolant emulsions. The emulsion circulating in the machine will not be weakened in its homogenity, stability or consistency, due to a rapid separation of the emulsion from the slide-way oil during standstill of the machine.

This lubricant offers

-       Good adhesiveness

-       Low friction values

-       High pressure absorption

-       No stick slip

-       Good demulsifying properties

 

This group of additional fluids is developed to improve the maintenance of the machines as well as to keep the cutting fluids in excellent condition

Preservative 025

Preservative 025 is a light yellow, pH-neutral additive

with low viscosity. It has a broad spectrum of activities against a great number of micro-organisms such as bacteria, fungi, yeast and spores. This additive will recondition used emulsions.

 

This group of additional fluids is developed to improve the maintenance of the machines as well as to keep the cutting fluids in excellent condition.

Kleen-Flush 020

Kleen-Flush 020 is a cleaning agent.

It removes impurities from tooling machines, their coolant tanks and tubing without any additional work. The machine can operate normally during the process. This cleaning agent is based on removing soil, bacterial slime, fungal patches and yeast colonies from surfaces. Even on inaccessible places!

Oil separations and creaming are quickly re-emulsified and loosened dirt is carried by the emulsion.

• Use Kleen-Flush 020 for emulsions without mineral oils.

Add 1 – 2% Kleen-Flush to the old emulsion and run for at least 8 hours, than drain system, flush with water and refill system.

 

This group of additional fluids is developed to improve the maintenance of the machines as well as to keep the cutting fluids in excellent condition.

Kleen-Flush 010

Kleen-Flush 010 is a cleaning agent.

It removes impurities from tooling machines, their coolant tanks and tubing without any additional work. The machine can operate normally during the process. This cleaning agent is based on removing soil, bacterial slime, fungal patches and yeast colonies from surfaces. Even on inaccessible places!

Oil separations and creaming are quickly re-emulsified and loosened dirt is carried by the emulsion.

• Use Kleen-Flush 010 for emulsions containing mineral oils.

Add 1 – 2% Kleen-Flush to the old emulsion and run for at least 8 hours, than drain system, flush with water and refill system.

 

This group of additional fluids is developed to improve the maintenance of the machines as well as to keep the cutting fluids in excellent condition.

Anti-Foam 077

Anti-Foam 077 is a mineral oil free de-foaming additive.

It is suitable for all water mixed coolants and serves only for re-defoaming.

Anti-Foam 077 maintains its anti-foaming effect over a long period, compared to traditional defoamers.